Yamaha e-bike upgrade: what you need to know
Yamaha drives are used in many e-bikes, not only Yamaha bikes. Here are the key points about the software upgrade based on the shop’s information.
Does my bike fit?
The upgrade is meant for Yamaha drives from model year 2016. According to the shop, older Yamaha systems do not need a code. If your bike is older, just contact the shop.
What does the upgrade do?
- Motor support up to approx. 45 km/h, depending on the system
- no chip, no installation, reversible at any time
- €69 for one bike or €119 for two bikes
How the activation works
- Connect the display to your PC or laptop via Micro-USB.
- Open the activation link from the email in Chrome or Edge.
- Enter the license code. It only takes a few minutes.
Smartphones and tablets are not supported for Yamaha, so you need a computer.
Why does the display show less afterwards?
After the upgrade the display shows speed, distance and range up to 50 % lower than you actually ride. To see your real speed the shop recommends a GPS app. More in our guide Display after tuning.
Which device do I need?
For Yamaha a PC or laptop with Chrome or Edge. For the other drives see iPhone, Android or PC.